Club Cannon Micro CO2 Jet MKII 5-pin DMX 110v with upgrade to 25 ft CO2 Hose

Description

Club Cannon Micro CO2 Jet MKII 5-pin DMX 110v with upgrade to 25 ft CO2 Hose
Club Cannon Micro CO2 Jet MKII 5-pin DMX 110v with upgrade to 25 ft CO2 Hose
The Club Cannon Micro Jet MKII is a stationary CO2 fixture used to create extraordinary special effects. This CO2 Jet produces a 20-30FT plume of ice cold fog.
Control your Club Cannon Micro Jet MKII with a DMX controller, or via momentary power with the included Power Mode Adapter. Most customers will elect to use a DMX controller to trigger the Micro Jet MKII. If you need a control solution, consider one of Club Cannon's standalone DMX Controllers.
Small Footprint. Big Effect. Don't let the size fool you. The Micro Jet MKII is a powerful product that will produce 25-30FT plumes of ice cold fog. With integrated DMX control, triggering your CO2 Jets has never been easier.
WHAT'S INCLUDED
Micro Jet MKII
Upgraded to 25’ CO2 Hose
CO2 Tool
5 Extra Washers
True1 Power Cord
Power Mode Adapter
5-Pin DMX Control
Instructions
FEATURES
DMX Controllable
Robust CO2 Valve
Quick Connect Hose
Compact size
Neutrik True1 input
Clamp holes on base plate
Versatile output angle options
Made in the USA
CONTROL:
Control your Club Cannon Jet with DMX via the input & output connections. Control can be achieved by using one of the Club Cannon DMX Controllers. The Micro Jet MKII requires 1 channel of DMX to engage output.
MOUNTING:
The steel base plate is designed to keep the jet in place while in use. The base is designed to allow 2x truss clamps to be installed, making it easy to hang the fixture from trussing. The Micro Jet MKII requires clamps that use 1/2″ bolts.
Additionally, the feet can be removed from the base if the product is to be mounted to a solid surface.
OUTPUT:
This CO2 jets output can be angled 0-90 degrees, making it suitable for a variety of applications. Simply loosen the barrel fitting on the side of the jet, position at desired angle, and tighten with an adjustable wrench. When attaching the barrel assembly, tighten the fittings 1/4 turn past hand tight to ensure a solid connection.
On average, the CO2 will shoot 20-30ft. In high humidity places, the output can go even further.
PURGE LINES:
This feature will allow you to purge the remaining pressure through the unit after your tank has been turned off. To activate, disconnect DMX and hold buttons 1 & 3 for 3 seconds. You will be prompted with a “GET BACK” warning on the screen, followed by a 5 second countdown. The valve will then open for 10 seconds, sufficient for clearing hose lines.  Once all pressure is clear, you can safely disconnect the hose fittings.
NOTE:
A Siphon CO2 Tank is required for the Club Cannon Micro Jet MKII to operate properly. More info about CO2 is listed below.